|
|
|
|
|
|
|
|
This is our real "secret weapon"!
|
|
For Shelbys, Mustangs through 1972, and 1963 & newer Falcons. *
Custom setup for your application.
|
|
|
|
|
|
|
Complete Front / Rear Spring Package with all mounting hardware &
corner weight balance poly shims
|
|
|
Package price, as shown, without spring offset adaptors:
|
$480.00
|
|
Package price with offset adaptors (see below):
|
$545.00
|
|
|
NARROW REAR SPRING FEATURES:
|
|
Minimal to zero rear roll steer.
Minimal torsion resistance.
1¾ inch width.
Second leaf extends forward under front eye for reduced wrap up.
Operate with both minimal positive or negative arch.
Different models cover up to 3200 lb cars.
Up to ¾ inch more tire clearance.
Will bolt directly on street set ups.
Adjustable for equal or staggered tire setups.
Designed to work with our damper override system.
System engineered to work with EPS complete front & rear suspension.
As used on our award-winning & record-breaking cars.
|
|
HISTORY:
It all started at the November 1966 SCCA National Championship Runoffs in Riverside California. Walt was on the pole for B/P with his Shelby GT350R, but Don Yenko had his Corvette also on the front row only .1 sec off Walt’s time. Walt was concerned that Don would tap him for as spin about turn 5, like Bob Johnson did to Walt at Daytona in 1965. So, Walt’s crew headed for a salvage yard and picked up some softer rear springs, which would reduce over steer. They did and Walt went on to win the National Championship.
So, when Walt & his son, Chip, got into the Shelby/Mustang vintage race restoration business in 1988, they remembered the soft springs. But, 22 years later, the tires were wider, so rubbing was a problem. It was decided to narrow the rear spring leafs from 2½ to 1¾ inches. These have been constantly improved over the years for reliability; arch balance and minimum inter leaf friction. They now also have to work on cars with a wide weight & horsepower spread. So, several versions of the springs have been developed.
It was also necessary to develop a universal mounting kit that would allow using the original body mounting brackets without modification. The kit has narrow poly bushings with washers to fill out the mounting width. The washers can be moved inboard or outboard to locate the springs properly to the housing. New front mounting bolts are also included as the old ones are often ruined during removal. Bolting the springs directly in place of original springs provides 3/8 inch more tire clearance. A full ¾ inch tire clearance can be had by use of our mounting offset adaptors. The rear shackle design allows adjusting the ride height ½ inch.
|
|
|
|
|
$66.00
Spring Offset adaptors to move spring in for full ¾ inch clearance on stock set ups where the spring perch has not been moved. Fitted to spring bolt heads.
(*) For use on Falcons older than 1964, requires some adapting. See Falcon page . We have not tried them on Falcons earlier than 1963. May be the same as 1963.
|
|
Please feel free to contact us for further information at anytime:
Shop: 303-674-6017
Fax: 303-674-7255
Email: epswalth@aol.com
|
|
|
|
|
Contact EPS for current pricing, shipping and availability information.
|
|
|
|
|
|
|
|
|
|
