|
|
|
|
|
|
EPS has developed the following parts and assemblies
through their work with Ford race cars since 1965.
|
|
While we try to keep our prices stable, they are subject to change at any time without notice.
Prices do not include shipping.
Contact EPS for current prices & shipping costs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2-5560-A
|
Performance/Competition Rear Leaf Springs
|
|
$235.00
|
|
|
2-5560-B
|
Performance/Competition Rear Leaf Springs
|
|
$235.00
|
|
|
2-5781
|
Complete Rear Spring mounting Kit
|
|
$125.00
|
|
|
2-5560-O
|
Spring Offset Spacers Matched to Springs:
|
|
$66.00
|
|
|
|
Complete Pkg of rear springs , Mounting Kit without Offset Spacers
|
|
$350.00
|
|
|
|
Complete Pkg of Rear Springs, Mounting Kit with Offset Spacers
|
|
$410.00
|
|
|
|
Pair lower rear spring plates, narrowed with tie down Loops, painted
|
|
$168.50
|
|
|
|
Same powdered coated
|
|
$198.50
|
|
|
|
Custom ¾" & 1" Aluminum Lowering blocks
|
|
$69.95
|
Est.
|
|
|
Same, but with built in 3/8" offset matched to springs
|
|
$79.95
|
Est.
|
|
|
Heavy Duty Axles with assembled bearings, access hole in flange, long competition wheel studs
|
|
$455.00
|
|
|
|
Panhard Rod Assembly
|
|
$360.00
|
|
|
|
|
|
This is a complete assembly ready to install with Frame and housing brackets, panhard bar, Bolis frame brace bar. Designed for racing and High Performance, The emphasis is on light weight, super strong with highest quality rod ends and mounting hardware. Rod is powdered coated.
|
|
|
|
|
|
Override Axle Damper Assembly
|
|
$678.95
|
|
|
|
|
|
This is the complete assembly with frame brackets, forward support brackets, Teeter Totter Pivot, Horizontal dampers, rear damper bracket and all high quality rod ends and mounting hardware. Override bars and teeter totter are powdered coated.
|
|
|
|
|
|
Combination Panhard Rod & Override Assemblies
|
|
|
$987.00
|
|
|
|
New EPS Ford 9" Housing Assembly
|
|
$1,275.00
|
|
|
|
|
|
Maximum Strength with Minimum Unstrung Weight. This is a new custom 3" diameter housing prepared to your width. The Housing is reinforced and has been powder coated. The above Includes labor, but not the brackets or plugs.
|
|
|
|
|
|
Housing fill & drain plugs
|
|
$45.00
|
|
|
|
Complete EPS 9" Housing with all Panhard Rod/Override Parts
|
|
|
$2,250.00
|
|
|
Spring Mounting U Bolt Assy for 3" EPS Housing
|
|
$33.95
|
|
|
|
|
|
|
|
|
Competition Early Upper/ Lower Control Arms
|
|
|
$695.00
|
|
|
|
|
|
Competition Strut Rods, compete with bushings & mounting hardware
|
|
|
$228.50
|
|
|
|
|
|
Competition spring seats
|
|
|
$124.95
|
|
|
|
|
|
Complete Front Suspension Package (Before Core Charge)
|
|
|
|
$995.50
|
|
|
Pair front springs
|
|
|
$89.50
|
|
|
Pair front springs with 1 tall & 2 short isolators
|
|
|
$128.00
|
|
|
All Front Sway Bar Kits
|
|
|
$98.50
|
|
|
|
|
|
FRONT & REAR SUSPENSION PARTS
|
|
|
Total Front/ Rear spring package with mounting kit & isolators
|
|
|
$500.00
|
|
|
Same with offset adaptor
|
|
|
$570.00
|
|
|
|
|
|
|
|
|
BIG SPINDLE
|
|
|
|
|
|
Big Spindles, magnafluxed & checked, pair
|
|
|
$295.00
|
|
|
Big Spindles Connection Kit with Tie rod ends & Modified adjusting sleeves
|
|
|
$141.50
|
|
|
Big spindle Bearing Kit
|
|
|
|
|
|
|
|
Inner & Outer bearings, wheel seals, spindle nut & cap kit
|
|
|
$90.95
|
|
|
|
|
|
|
|
|
Complete Spindle Package
|
|
|
|
$498.50
|
|
|
|
|
Notes: While we try to keep our prices stable, they are subject to change at any time without notice. In some cases, there will be shipping charges to EPS.
This includes heavy items like axles & housings. Costs do not include shipping from EPS.
EPS has a number of products under development. The next to be offered will be our low drag racing power steering. So far, the test results have been excellent. Even Chip likes it.
We have supplied complete race vehicle electrical systems for over 23 years. We are in the process of redesigning it for the future. The system includes all of the wiring, the gauges, MSD ignition module and shift light, charging wiring, ignition switch box, plug in jumper cable, oil pressure safety circuit, etc. We will have pricing soon.
We also have supplied complete brake systems on all the race restoration cars.
|
|
|
|
|
|
|
|
